ขาย Power Amp acmaudio M2500

Technical Specification
Rated Power Bridge Mode 4Ω 2250 Watts @ 1KHz at < 0.1% T.H.D.
Rated Power (2 x 2Ω) 1125 Watts per channel @ 1KHz at < 0.1% T.H.D. both channels driven
Rated Power (2 x 4Ω) 750 Watts per channel @ 1KHz at < 0.05% T.H.D. both channels driven
Rated Power (2 x 8Ω) 500 Watts per channel @ 1KHz at < 0.025% T.H.D. both channels driven
Rated Power (1 x 2Ω) 1260 Watts @ 1KHz at < 0.1% T.H.D.
Power Bandwidth 10Hz - 30KHz ; 0, -3dB at rated 350 Watts 8Ω power
T.H.D. (2 x 2Ω) < 0.1% @ 900 Watts per channel from 20Hz - 20KHz
T.H.D. (2 x 4Ω) < 0.1% @ 600 Watts per channel from 20Hz - 20KHz
T.H.D. (2 x 8Ω) < 0.1% @ 400 Watts per channel from 20Hz - 20KHz
Input CMRR > -65dB @ 1KHz
Rated Power (1 x 4Ω) 840 Watts @ 1KHz at < 0.05% T.H.D.
Rated Power (1 x 8Ω) 560 Watts @ 1KHz at < 0.025% T.H.D.
Minimum Load Impedance 2Ω
Maximum RMS Voltage Swing 77 Volt
Frequency Response 10Hz - 100KHz ; +0, -3dB at 1 Watt
Phase Response +5 to -15 from 20Hz to 20KHz
Input Impedance 10KΩ balanced
Cooling Two temperature dependant variable speed 80 mm. high output DC fans
Controls Two front panel attenuators, rear panel mode switch and gain select switch
Voltage Gain 0.775V, 32dB or 26dB
Crosstalk > -60dB @ 1KHz at rated power @ 8Ω
Hum and Noise > -107dB, "A" weighted referenced to rated power @ 8Ω
Slew Rate > 30V/us
Dampling Factor (8Ω) > 700:1 @ 20Hz - 1KHz
Indicator LEDs 2 clip, 2 signal presence, 1 active status, 2 protection
Protection Thermal, DC, turn-on bursts, subsonic, incorrect loads
Connectors XLR, speakon and binding post speaker output, 240/230 Volt 20 Amp IEC mains
Construction 16 ga. stell
Dimensions [HxWxD] 89mm. x 483mm. x 496mm.
Net Weight 23kg.
Gross Weight 26kg.